tablet coating machine, R&D tablet coating machine

R&D Tablet Coater

A revolutionary self-contained film coater is adapted to handle smaller trial batches of tablets and granules. The Pharma R & D tablet coating machine has elegant exterior fabricated of SS 304 box with coating pan supported in a tangential position of 35° to 45°.

Tablet Coater R&D Model

small coating pan uses for sugar/film coating onto tablets. All contact parts are made from Stainless Steel 316L or FDA approved materials for cGMP compliance.

PAN: The Coating Pan is Semi Ellipsoidal size pan with a circular mouth for charging & discharging of tablets, Pan mounted at an inclination of 45 degrees to the horizontal.

DRIVE ASSEMBLY: The tablet coating pan consists of a suitable 3 Phase, 440 V, 1440 RPM TEFC motor with suitable worm
reduction gear box and cone pulley arrangement to give three speed output.

HOT AIR BLOWER: The tablet coating pan unit is provided with a hot air blower consisting of suitable 3 Phase 440 V,
2880 RPM TEFC electric motor & centrifugal blower with damper delivering required CFM. The air is heated by means of suitable electric
heater to give air at 30 to 90 degrees Heater with thermostat control and flexible hose pipe.

CONTROL PANEL: Unit provided with suitable control panel with starters and push button to actuate the drive and for blower
The circuits consists of MCCBs, relays and contractors in series Ample overload protection is provided by the MCCB and the relay Wires coming
out of the connections are numbered for easy recognition.

MOUNTING: The motor and gear box is mounted inside sturdy MS frame and the pan mounted on the Gearing housing fitted in the
stand. Blower mounted by the side of the stand or placed in remote location if required.

FINISH: All joints argon Arc welded and all SS Parts polished to suitable finished required of pharmaceutical equipment MS
parts painted to smooth finish.

Tablet Coater Specification

R&D Coater SPEC.
Motor Drive 0.2kW/0.25 hp Single Phase (1PH)/230V
Motor Induction motor 40 watts
Electrical services As per country requirement
RPM 3 to 150 rpm
Foundation Self
Blower 0.50 hp
Heater 1.0 kW
Height 1215mm
Width 400 mm
Length 605 mm
Weight(Approx.) 110 Kg
Model No. ABFTCM-01


* Power voltage can be adjusted as per customer’s domestic power voltage requirements.
* Rights of technical improvements & modification reserved.
* Illustrations & dimensions are shown for information purpose only.


Send Inquiry